Marantz NR1504 オーナーマニュアル

89

For menu operation, connect a TV to this unit and display the menu on the TV screen. For menu operations, see the following page.

By default, this unit has recommended settings defined. You can customize this unit based on your existing system and your preferences.

Sets the output level to clarify the dialogue 

output from the center channel.

This setting adjusts the volume level for the 

subwoofer.

Adjusts surround sound parameters.

Adjusts the tonal quality of the sound.

Expands the low and high frequency components 

of compressed audio content such as MP3 files 

to enable richer audio playback.

Compensates for incorrect timing between video 

and audio.

Set the MAIN ZONE (room where the unit is 

located) volume setting.

Makes Audyssey MultEQ®, Audyssey Dynamic 

EQ® and Audyssey Dynamic Volume® settings.

Uses the graphic equalizer to adjust the tone of 

each speaker.

Makes settings for HDMI video/audio output.

Select the on-screen display user interface 

preferences.

Set the video output signal format for the TV you 

are using.

Changes input connector assignment.

Changes the display name for this source.

Remove from the display input sources that are 

not used.

Adjusts the playback level of the audio input.

Sets the audio input mode and decode mode.

The acoustic characteristics of the connected 

speakers and listening room are measured and 

the optimum settings are made automatically.

Perform when setting the speakers manually 

or when changing settings made in Audyssey® 

Setup.

Display network information.

Enables network communication in standby 

power mode.

The Friendly Name is the name of this unit 

displayed on the network. You can change the 

Friendly Name according to your preferences.

Make settings for wired LAN.

Used to check the network connection.

Use when receiving maintenance from a Marantz 

service engineer or custom installer.

Sets the language for display the menu on the 

TV screen.

When you do not perform any operation on this 

unit with no audio or video input for a specified 

time, this unit automatically enters the standby 

mode. Before it enters the standby mode, “Auto 

Standby” is displayed on the display of this unit 

and the menu screen.

Makes settings related to the display on this unit.

Show information about receiver settings, input 

signals, etc.

Selects whether or not to send anonymous 

usage data to Marantz.

Set whether or not to check for firmware update, 

update the firmware, and display update and 

upgrade notifications.

Protect settings from inadvertent changes.

Perform the installation, connection, and setup procedures to prepare the 

unit for operation following guidance from the setup section of this manual.

C 7

DVD