Magnavox F7 ユーザーズマニュアル

This unit is compatible with the progressive scan system. 
The feature provides you with higher definition images 
than the traditional output system does. To utilize this 
feature, you must set progressive scan mode to “ON”.

K / L] to select “ON“, then press [OK].

{ / B] to select “Yes“, then press [OK].

K / L] to select “Yes“ within 15 seconds, then 

press [OK]. 
Your setting will be activated.

•  If your TV is compatible with progressive scan (480p), 

you are recommended to use the HDMI or 
component video cable (commercially available) to 
connect this unit to the TV. (Refer to pages 17-18.) If 
not, use the RCA video cable and set the progressive 
scan to “OFF” or press and hold [SETUP] for more 
than 3 seconds during HDD / DVD playback.

•  When selecting “No” or not pressing any buttons on the 

unit or remote control within 15 seconds at step 3), 
progressive scan remains to be “OFF” (interlace scan). 

Use this feature to adjust the aspect ratio of the video 
source which is different from your TV’s ratio to fit your TV 
monitor without distorting the picture.
Use [

K / L] to select a setting, then press [OK].

Select “4:3 Letter Box”, so that black bars appear on the 
top and bottom of the TV screen when playing back a 
wide-screen picture. Select “4:3 Pan & Scan” for a full 
height picture with both sides trimmed when playing 
back wide-screen picture.

Select “16:9 Wide”.