Lucent Technologies Definity Enterprise Communication Server 8.2 ユーザーズマニュアル
DEFINITY ECS Release 8.2
Administrator’s Guide
Administrator’s Guide
555-233-506
Issue 1
April 2000
Screen reference
1020
Trunk Group
17
Break (msec)
PPM
For CO, DIOD, FX, PCOL, and WATS trunks. This field appears when the
Direction field is
Direction field is
outgoing
or
two-way
.
Frequency
This field identifies the PPM pulse frequency(ies) sent by the public network. It
appears if the Direction field is
appears if the Direction field is
outgoing
or
two-way
and PPM is
y
. Circuit packs
can detect up to three different frequencies, (12kHz, 16kHz, and 50Hz), plus two
frequency combinations, (50Hz/12kHz and 50Hz/16kHz). This field controls
TN465B, TN2138, and TN2184 circuit packs.
frequency combinations, (50Hz/12kHz and 50Hz/16kHz). This field controls
TN465B, TN2138, and TN2184 circuit packs.
Valid entries
Usage
Enter the duration of the break interval (the pulse duration) while the system is
outpulsing digits using dial pulse signaling. The field cannot be blank.
outpulsing digits using dial pulse signaling. The field cannot be blank.
20
to
80
in
increments of 5
If PPS field is
10
, the sum of the Make (msec) and Break
(msec) fields must equal 100.
10
to
40
in
increments of 5.
If the PPS field is
20
, the sum of the Make (msec) and Break
(msec) fields must equal 50.
Valid entries
Usage
y/n
Enter
y
if Periodical Pulse Metering (PPM) pulses should be
collected from the public network to determine call cost. If this
field is
field is
y
, the Frequency field appears.
Valid entries
Usage
12k
The TN465B (or later) and TN2184 can only detect 12k and
16kHz PPM. Therefore, if
16kHz PPM. Therefore, if
12k
is administered, the circuit pack
will be set to detect 12kHz.
16k
The TN465B (or later) and TN2184 can only detect 12k and
16kHz PPM. Therefore, if
16kHz PPM. Therefore, if
16k
is administered, the circuit pack
will be set to detect 16kHz.