Lucent Technologies Definity Enterprise Communication Server 8.2 ユーザーズマニュアル
DEFINITY ECS Release 8.2
Administrator’s Guide
Administrator’s Guide
555-233-506
Issue 1
April 2000
Managing announcements
366
Adding announcement data modules
13
Instructions
To set up the announcement data module, determine the port location of the
Announcement circuit pack or the Auxiliary Trunk circuit pack. You can find
circuit pack information on the Integrated Announcement Board screen.
Announcement circuit pack or the Auxiliary Trunk circuit pack. You can find
circuit pack information on the Integrated Announcement Board screen.
To set up the data module on the Announcement circuit pack located at 01B18:
1. Type
add data-module next
and press
RETURN
.
The
Data modules
screen appears.
The system automatically fills in the number of the next available
extension. Make sure the extension conforms to your dial plan. If you want
to assign a specific extension, type that extension in the command instead
of “next.”
extension. Make sure the extension conforms to your dial plan. If you want
to assign a specific extension, type that extension in the command instead
of “next.”
2. In the Name field, type
announcement data module
.
3. In the Type field, type
announcement
and press
RETURN
.
The Port field automatically changes to Board.
4. In the Board field, type
01B18
.
This is the address of the announcement circuit pack.
5. Press
ENTER
to save your changes.
DATA MODULE
Data Extension: 2002
Name: announcement data module
Type: announcement
COS: 1
Board: 01B18
COR: 1
ITC: restricted__
TN: 1
ASSIGNED MEMBER (Station with a data extension button for this data module)
Ext Name
1: ____
1: ____
__________________________