Lochinvar SMART TOUCH 1.3 ユーザーズマニュアル
4
1
Installation
Starting the program
To start one of the programs, double-click on the icon (if you
put it on your desktop), or click on Start, then Programs, and
select the program you wish to start. See FIG 1-1 and FIG 1-2
above.
put it on your desktop), or click on Start, then Programs, and
select the program you wish to start. See FIG 1-1 and FIG 1-2
above.
There are two access levels for this program. The user access
level allows only certain settings to be changed. The installer
access level allows more settings to be changed. The program
defaults to the user level when started. You will notice that a
lock symbol appears in the lower right-hand corner of the
window. To move to the installer level, a password must be
entered. This password is located on a label on the CD-ROM
case. You may enter the password by clicking on the “key”
button in the upper left-hand corner of the window. A
window opens in which you can type in the password (see
FIG. 1-3). Note that the password is case sensitive and is in all
CAPS. Click on the Ok button, or press the Enter key. You
will notice that the lock symbol at the lower right-hand corner
of the window has changed into a key symbol.
level allows only certain settings to be changed. The installer
access level allows more settings to be changed. The program
defaults to the user level when started. You will notice that a
lock symbol appears in the lower right-hand corner of the
window. To move to the installer level, a password must be
entered. This password is located on a label on the CD-ROM
case. You may enter the password by clicking on the “key”
button in the upper left-hand corner of the window. A
window opens in which you can type in the password (see
FIG. 1-3). Note that the password is case sensitive and is in all
CAPS. Click on the Ok button, or press the Enter key. You
will notice that the lock symbol at the lower right-hand corner
of the window has changed into a key symbol.
Figure 1-3 Password Window
There are some fields along the bottom of the window (FIG.
1-1): The left field shows the location of the program. The next
field shows the status of the communication between the PC
and the SMART TOUCH. This will say “No connection” when
the program is started. As soon as the program sends or receives
data from the SMART TOUCH, this field will show
“Connected”. The right field shows the filename of the
parameter file in the program’s memory (see parameters in
Section 6).
1-1): The left field shows the location of the program. The next
field shows the status of the communication between the PC
and the SMART TOUCH. This will say “No connection” when
the program is started. As soon as the program sends or receives
data from the SMART TOUCH, this field will show
“Connected”. The right field shows the filename of the
parameter file in the program’s memory (see parameters in
Section 6).
PC Program Instructions
Figure 1-1 SMART TOUCH PC Main Screen
Figure 1-2 Sitecs937Lab Main Screen