Lochinvar SMART TOUCH 1.3 ユーザーズマニュアル
7
3
Graphics Screen
The Graphics Screen allows you to observe the changes in
various readings while the heater operates (see FIG. 3-1).
Note that the vertical scale has two numbers for each division.
By default, the Outlet Temperature, Inlet Temperature, System
Supply Temperature (if connected), Outdoor Temperature (if
connected), Tank Sensor Temperature (if connected), Space
Heating setpoint, Tank setpoint, 0-10Vdc input voltage, and
fan speed are plotted.
various readings while the heater operates (see FIG. 3-1).
Note that the vertical scale has two numbers for each division.
By default, the Outlet Temperature, Inlet Temperature, System
Supply Temperature (if connected), Outdoor Temperature (if
connected), Tank Sensor Temperature (if connected), Space
Heating setpoint, Tank setpoint, 0-10Vdc input voltage, and
fan speed are plotted.
In addition, the status of the Gas Valve Output, Flame
Current, and Pump Outputs are indicated by horizontal lines.
When these readings are off, the line is thin; when on, the line
is wide. Any of these readings can be removed from the graph
by deselecting them at the bottom of the window. The
current values of these readings are also displayed at the
bottom of the window as depicted in FIG. 3-1.
Current, and Pump Outputs are indicated by horizontal lines.
When these readings are off, the line is thin; when on, the line
is wide. Any of these readings can be removed from the graph
by deselecting them at the bottom of the window. The
current values of these readings are also displayed at the
bottom of the window as depicted in FIG. 3-1.
The time scale and vertical (Y) scale can be changed by
clicking on the Options button to get the Options window,
and then the Up or Down buttons for the desired scale. The
top number represents °F, and the bottom number represents
°C. Press the Ok button to close the Options window. The
background color of the Graphics Screen can be changed by
pressing the Display button on the Options window.
clicking on the Options button to get the Options window,
and then the Up or Down buttons for the desired scale. The
top number represents °F, and the bottom number represents
°C. Press the Ok button to close the Options window. The
background color of the Graphics Screen can be changed by
pressing the Display button on the Options window.
Figure 3-1 SMART TOUCH Graphics Screen
As with the Status Screen, a log file can be generated to record
the performance of the appliance. Click on the Options button
to open the Options window. Click on the LogFile button to
create a file name and define the folder in which to put it. Once
a Log File is defined, click on the Log button to start logging the
readings. The Log button will turn green to indicate that the
program is logging, and the log file size will appear at the top of
the Graphics Screen window. Note that the file size will increase
as more readings are logged. Click on the Log button again to
stop logging of the readings. The Log button will turn gray
again to indicate that logging has stopped.
the performance of the appliance. Click on the Options button
to open the Options window. Click on the LogFile button to
create a file name and define the folder in which to put it. Once
a Log File is defined, click on the Log button to start logging the
readings. The Log button will turn green to indicate that the
program is logging, and the log file size will appear at the top of
the Graphics Screen window. Note that the file size will increase
as more readings are logged. Click on the Log button again to
stop logging of the readings. The Log button will turn gray
again to indicate that logging has stopped.
A bitmap can also be generated of the Graphics Screen. Click
on the Options button, and then the Bitmap button. A bitmap
of the window will be saved into the C:/program files/SMART
TOUCH PC/ENCONFLS directory.
on the Options button, and then the Bitmap button. A bitmap
of the window will be saved into the C:/program files/SMART
TOUCH PC/ENCONFLS directory.
PC Program Instructions