Linksys BUSINESS SPA932 ユーザーズマニュアル
Linksys SPA9x2 Phone Administration Guide
Cisco Confidential--First Draft
172
Ext Tab
SPA9x2 Phone Field Reference
Subscriber Information
Proxy Fallback Intvl
This parameter sets the delay (sec) after which the
phone will retry from the highest priority proxy (or
outbound proxy) servers after it has failed over to a
lower priority server. This parameter is useful only if the
primary and backup proxy server list is provided to the
phone via DNS SRV record lookup on the server name.
(Using multiple DNS A record per server name does not
allow the notion of priority and so all hosts will be
considered at the same priority and the phone will not
attempt to fall back after a fail over).
phone will retry from the highest priority proxy (or
outbound proxy) servers after it has failed over to a
lower priority server. This parameter is useful only if the
primary and backup proxy server list is provided to the
phone via DNS SRV record lookup on the server name.
(Using multiple DNS A record per server name does not
allow the notion of priority and so all hosts will be
considered at the same priority and the phone will not
attempt to fall back after a fail over).
Defaults to 3600
Proxy Redundancy Method
Select Normal or Based on SRV port. The phone creates
an internal list of proxies returned in the DNS SRV
records.
an internal list of proxies returned in the DNS SRV
records.
If you select Normal, the list contains proxies ranked by
weight and priority.
weight and priority.
If you select Based on SRV, the phone uses normal, then
inspects the port number based on the first listed proxy
port.
inspects the port number based on the first listed proxy
port.
Defaults to Normal.
Parameter
Description
Display Name
Display name for caller ID.
User ID
Extension number for this line.
Password
Password for this line.
Defaults to blank.
Use Auth ID
To use the authentication ID and password for SIP
authentication, select yes. Otherwise, select no to use
the user ID and password.
authentication, select yes. Otherwise, select no to use
the user ID and password.
Defaults to no.
Auth ID
Authentication ID for SIP authentication.
Defaults to blank.
Parameter
Description