Lenoxx DVD-1002 ユーザーズマニュアル
IB-DVD1002 (AT)-WM-E-032706
CONNECTIONS
4
YOUR DVD PLAYER
RED
WHITE
RED
WHITE
YOUR TV SET
Cr/Pr
Cb/Pb
Y
S-VIDEO VIDEO OUT COAXIAL
R - AUDIO - L
YOUR DVD PLAYER
YOUR TV SET
Cr/Pr
Cb/Pb
Y
S-VIDEO VIDEO OUT COAXIAL R - AUDIO - L
RED
WHITE
YELLOW
RED
WHITE
YELLOW
COMPONENT VIDEO IN
Cr/Pr
Cb/Pb
Y
Cr/Pr Cb/Pb Y
S-VIDEO VIDEO OUT COAXIAL R - AUDIO - L
YOUR TV SET
YOUR DVD PLAYER
Better – S-Video
Connect the DVD player to your TV with the
supplied video (yellow) and audio (red &
white) cables as above. In this connection,
please set the video output mode to S-VIDEO
(see page 14).
supplied video (yellow) and audio (red &
white) cables as above. In this connection,
please set the video output mode to S-VIDEO
(see page 14).
Connect your player to TV using one of the 3 diagrams below.
For better picture quality, connect the DVD player
to your TV with an optional S-Video cable (not
included) and the supplied audio (red & white)
cables to your TV if your TV has an S-Video
input as above. In this connection, please set the
video output mode to S-VIDEO (see page 14).
to your TV with an optional S-Video cable (not
included) and the supplied audio (red & white)
cables to your TV if your TV has an S-Video
input as above. In this connection, please set the
video output mode to S-VIDEO (see page 14).
Good – Composite (Normal)
Best – Component
Connect the DVD player to your
TV with the optional Component
video cables (not included) and
the supplied audio cables (red &
white) to your TV if your TV has
component video inputs (Pb/Pr/
TV with the optional Component
video cables (not included) and
the supplied audio cables (red &
white) to your TV if your TV has
component video inputs (Pb/Pr/
IMPORTANT
The progressive scan video quality is available only when
using component video inputs Pb/Pr/Y and a progressive
scan TV. Compared to interlaced video, progressive scan
video effectively doubles the scanning rate of the picture
and offers higher picture resolution and quality, resulting in a
very stable, flicker-free image. You can enter the Progressive
Scan Video mode with the following steps:
1. Set the Video Output mode to YUV (see page 14).
2. Fully stop your DVD player.
3. Open the disc door.
4. Press the DISPLAY/P-SCAN button, the display will
using component video inputs Pb/Pr/Y and a progressive
scan TV. Compared to interlaced video, progressive scan
video effectively doubles the scanning rate of the picture
and offers higher picture resolution and quality, resulting in a
very stable, flicker-free image. You can enter the Progressive
Scan Video mode with the following steps:
1. Set the Video Output mode to YUV (see page 14).
2. Fully stop your DVD player.
3. Open the disc door.
4. Press the DISPLAY/P-SCAN button, the display will
show the tip of “ENABLE PROGRESSIVE”, use the
button to highlight “OK” option and press the OK button
to confirm.
button to highlight “OK” option and press the OK button
to confirm.
Y or Cb/Cr/Y) as shown. In this connection, please set
the video output mode to YUV (see page 14).
the video output mode to YUV (see page 14).
(TV set)
NOTE: If you want to use Normal video or S-video
mode again, please open the disc door and press the
DISPLAY/P-SCAN button to get out of the Progressive
Scan Video mode and view in normal video mode. (If this
is not done, there will be no picture or a distorted picture.)
IB-DVD1002(AT)-WM-E-032706.pmd
7/5/2006, 10:24 AM
5