Leviton Surge Protector 2206 ユーザーズマニュアル

Cat. No. 6291

 20A-120V/  60Hz AC ONLY

Minimum Voltage: 112V
Maximum Voltage: 138V
Maximum number of Modules per circult: 10

ENGINEERING DATA:

Input Signal 121 kHz carrier signal superimposed

on a 12OV  AC power line.

Mlnlmum Signal Strength: 100mV.
Ambient Operating Temperature: Minimum 0° F

(-18°C)  to Maxlmum 104°F (40°C).

Ambient Humidity: 0 to 90% RH, non-condensing.

DESCRIPTION:

This Wall Switch Module is designed for use with

Levlton Decora Electronic Control (DEC) Powerline

Carder Components. It functions as a remote

control switching device which responds to ON/OFF
and ALL LIGHTS ON/OFF commands, from one or

more DEC controllers remotely located from the
module. The switch module can also be operated
manually as a standard type wall switch.

2

The module may be set to any of the 256 address
codes, selected at the time of installation. The
desired address Is set by removing the touchplate
and selecting letter and number codes with a small

blade screwdriver. The module is equipped with

back wire terminals and installs easily in a standard

wall box. It is suitable for incandescent and fluores-
cent lighting, as well as switch controlled appliance
when Dimming Is not desired.

The Cat. No. 6291  is assembled as white and an

ivory color conversion kit is provlded. This product

fits any color Decora Wallplate (sold separately).

Additional color conversion kits are available.

SAVE THIS INSTRUCTION SHEET!

IT CONTAINS IMPORTANT TECHNICAL DATA,

TESTlNG, AND TROUBLE SHOOTING INFORMA-
TION WHICH WILL BE USEFUL AFTER INSTAL-

LATION  IS COMPLETE.

IMPORTANT: Unlike standard single pole wall
switches the Cat. No. 6291 also requires a neutral

(white) wire for operation.