Lanier 5622 ユーザーズマニュアル

33

This chapter explains the procedure for placing the original on the exposure
glass and in the automatic document feeder (ADF), and setting original scan
area and orientation according to the placement method.
To correctly display the top/bottom orientation of the scanned original on a
computer, the correct placement must be chosen by setup on the control panel
and scanner driver.
There are two orientations for placing the original. See the table below.

❒ Normally, the original size is ( ) or ( ), but in the table below, a square orig-

inal is used to make the original orientation easy to understand. If the actual
original size changes, a combination of original orientation and the orienta-
tion specified on the control panel or scanner driver does not change.

Scanned original

Select the placement method.

Place the original on the ex-
posure glass.

Place the original in the auto-
matic document feeder 
(ADF).

Place the original.

(There are two original orienta-
tions.)

Place the 
original so 
that the top 
edge touches 
the top left of 
the exposure 
glass.

Place the 
original so 
that top edge 
touches the 
rear of the ex-
posure glass.

Place the top 
edge of the 
original first.

Place the 
original so 
that the top 
edge is set 
into the ADF.

 

Speci-
fy the 
orien-
tation.

When scanned by the 
delivery scanner or 
Document Server

(Specified on the con-
trol panel)

When scanned by the 
TWAIN scanner

(Specified by the Scan-
ner Control dialog box)

Original displayed on a compu-
ter