Lanier 2001 ユーザーズマニュアル
Setting Up Fax Unit
A - 8
Unpacking & Installation
Loading Paper
1
Remove the shipping tape from the
Tray Cover.
Tray Cover.
2
Remove the Tray Cover.
3
Remove the shipping tape and foam
from inside the Tray cavity.
from inside the Tray cavity.
4
If you are loading Letter or A4 size
paper, pull the Tray Extension out to
the first stop.
paper, pull the Tray Extension out to
the first stop.
5
If you are loading Legal size paper,
lift the Tray Extension slightly and
pull it out to the second stop.
lift the Tray Extension slightly and
pull it out to the second stop.
6
Place a piece of paper in the tray and
test to see the Side Guides are in the
correct position for your paper.
test to see the Side Guides are in the
correct position for your paper.
7
To change the positions of the
Guides to a new size paper, snap
them out and re-locate them.
Guides to a new size paper, snap
them out and re-locate them.
8
Place paper in the Tray and push the
Tray Extension in against the end of
the paper.
Tray Extension in against the end of
the paper.
Note: Refer to the Specifications
Chapter for information on what type
and size papers can be fed from this Tray.
Chapter for information on what type
and size papers can be fed from this Tray.
9
Replace the Tray Cover.
Note: When placing paper in the Tray, always remove any remaining paper and place
it on top of the new paper.
it on top of the new paper.