iSimple IS76PRO ユーザーズマニュアル

3

To  remove 

the  wireless  remote  from  the  mounting  cradle,  push  upwards  gently  on  the  remote 

by  placing  your  finger  inside  the  recess  on  the  side  of  the  mounting  cradle. 

Before using your remote control with your device, Please

first install the CR2025 Battery (included) into the remote as

shown. 

The wireless remote control is designed to give you access to your 

iPod, iPhone, or iPad

 music library 

without handling your device. The remote will provide such controls as: track forward, and track back, 
as well as navigation through the iPod menus.

 

 

The RF receiver is built into the iSimple cable. So it is installed automatically when you connect power 

and ground from the vehicle, to this iSimple cable. 

iPod, iPhone, or 
iPad

 is not charging

Fuse is blown 

Check the fuse on the MediaWire™PRO. If the fuse is blown, 
replace with a fuse of the same amperage. If fuse blows again, 
please call tech support.

iPod, iPhone, or 
iPad

 is not charging 

and fuse isn’t blown

Weak wiring connection

Check the Power (RED) and Ground (BLACK) wires to ensure that 
they are correctly connected to 12V+ and Ground.

No video

iPod, iPhone, or iPad

 is 

not set for video out 

In settings menu select Video Output ON.

No audio

RCA is not connected

Verify connection of RCA’s to Receiver.

Remote does not 
control 

iPod, iPhone, 

or iPad

Battery Issue

Check that battery is installed correctly, 
and does not need to be replaced

Transmission Interference

Re-route cable so that RF receiver is closer to front of dash (less 
obstructions)

+

Left

Right

miniUSB

 MENU same function as Menu on clickwheel

   moves the cursor up in iPod, iPhone, 

        or iPad Menu
3)

   moves the cursor down in iPod, 

       iPhone, or iPad Menu

 

 next track (press)

            fast forward (hold)

 

 previous track (press)

            rewind (hold)
6)

 

 Enter / select option

 

 Toggles Play / pause

+

Left

Right

miniUSB