Intel raid controller srcsas144e ユーザーズマニュアル

7

1. Power off the computer and all drives, enclosures, and system components. Remove 

the power cord from the computer.

2. Remove the chassis cover and access the PCI Express add-in card slots. See your 

server chassis documentation for instructions.

3. Align the controller’s connector with a x4 or x8 PCI Express* slot on the server 

board. 

4. Press down gently but firmly to ensure that the card is properly seated in the slot, as 

shown in 

. Secure the bracket to the computer chassis.

5. Connect the provided internal and/or external cables into the adapter using the 4-port 

combined end. Make sure the controller and cables are properly attached.
— If using an external cable, plug the cable into the connector in the end bracket.
— If using an internal cable, plug the cable into connector at the inside edge of the 

adapter.

AF000645