Intel raid controller srcsas144e ユーザーズマニュアル

14

The design and implementation of the Intel

®

 RAID Controller SRCSAS144E minimizes 

electromagnetic emissions, susceptibility to radio frequency energy, and the effects of 

electrostatic discharge. See the appendices for regulatory marks and certifications.

Table 2 lists the specifications for the Intel

®

 

RAID Controller SRCSAS144E.

J9

Drive fault LEDs

8 x 2 

header

LED signal on drive fault per port for eight ports.

Warning:   May not display correctly if only internal 
ports are used.

J11

Intel

®

 RAID Smart 

Battery connector

20-pin

Cable connector for the battery pack. This is 

located on the back (non-connector) side of the 

board.

Processor

(PCI Controller)

Intel

®

 80333 I/O processor at 500 MHz

Operating Voltage

+3.3 V, +12 V

Card Size

Low-profile PCI Express* adapter card size (7.71 inches by 2.535 inches)

Array Interface 

to Host

PCI Express* Rev 1.0A, x4 lane width 2.5 Gbps

SAS Bus Speed

3 GBps per port, point-to-point

SAS Controller

One LSI SAS 1068 controller

SAS / SATA Ports

1x4 internal ports, 1x4 external ports. Supports 32 SAS/SATA devices 

using expanders, 40 virtual disks.

Cache

Integrated 128 MB RAM, optional battery backup

Firmware

4 MB in reflashable flash ROM

Compatible Devices

Mixed capacity, mixed SATA and SAS in different enclosures; non-disk 

devices, including expanders.

Cabling

Small, thin cables do not restrict airflow; shared connectors for multiple 

drive types.