Infocus PN-L702B ユーザーズマニュアル
Page 15
INF7020 Hardware Guide
Operating the Remote
To operate, point the remote at the monitor (not at the computer module). The range of optimum operation is about 16.4’ (5m) at
an angle of approximately 10 degrees from the sensor.
an angle of approximately 10 degrees from the sensor.
10°
10°
10°
10°
16.4’
(5 m)
REMOTE CONTROL
• Press the remote’s Power On and Off buttons to turn the projector on and off.
• Press the remote’s MENU button to open the projector’s menu system.
• Use the arrow buttons to navigate, and the Enter button to select functions and adjust values in the menus.
• See "INF7020 Menu System" on page 18 for more information.
• Press the remote’s MENU button to open the projector’s menu system.
• Use the arrow buttons to navigate, and the Enter button to select functions and adjust values in the menus.
• See "INF7020 Menu System" on page 18 for more information.
The remote also has the following functions:
MUTE: Turns the sound on/off.
VOLUME +/-: Adjusts the volume up and down. Also acts as up and down arrows when the menu is active.
BRIGHT +/-: Adjusts the brightness up and down. Also acts as left and right arrows when the menu is active.
SIZE: Toggles between different screen sizes. Options include Wide, Zoom 1, Zoom 2, Normal, and Dot by Dot.
MUTE: Turns the sound on/off.
VOLUME +/-: Adjusts the volume up and down. Also acts as up and down arrows when the menu is active.
BRIGHT +/-: Adjusts the brightness up and down. Also acts as left and right arrows when the menu is active.
SIZE: Toggles between different screen sizes. Options include Wide, Zoom 1, Zoom 2, Normal, and Dot by Dot.
WIDE - stretches the PC or 4:3 video image to completely fill the screen.
ZOOM 1 - enlarges a 4:3 video input to fill the entire screen. This is done without adjusting the aspect ratio, so image edges
ZOOM 1 - enlarges a 4:3 video input to fill the entire screen. This is done without adjusting the aspect ratio, so image edges
(such as closed captioning/subtitles) may be cut off.
ZOOM 2 - can be used if Zoom 1 cuts off closed captioning subtitles.
NORMAL - displays the entire PC or video input image on the screen without changing the aspect ratio.
DOT BY DOT - displays the image in its native format, matching pixel for pixel.
ZOOM 2 - can be used if Zoom 1 cuts off closed captioning subtitles.
NORMAL - displays the entire PC or video input image on the screen without changing the aspect ratio.
DOT BY DOT - displays the image in its native format, matching pixel for pixel.
DISPLAY: Displays monitor information. Options include Information1 and Information2.
MODE: Select a color mode. Options include STD (standard), Vivid, sRGB (for PC input only).
MODE: Select a color mode. Options include STD (standard), Vivid, sRGB (for PC input only).