Infocus PN-L702B ユーザーズマニュアル
Page 28
The Power LED is flashing red and
green alternately. Temperature
is displayed in the corner of the
screen.
green alternately. Temperature
is displayed in the corner of the
screen.
• When the internal temperature of the monitor rises excessively, the brightness of the
backlight decreases automatically in order to prevent high-temperature related problems.
When this occurs, “TEMPERATURE” is displayed on the screen and the Power LED flashes
red and green alternately. (When TEMPERATURE ALERT is set to OSD & LED. This varies
depending on the setting.)
When this occurs, “TEMPERATURE” is displayed on the screen and the Power LED flashes
red and green alternately. (When TEMPERATURE ALERT is set to OSD & LED. This varies
depending on the setting.)
• If the internal temperature rises further, the monitor automatically enters standby mode.
(The Power LED continues flashing red and green alternately.)
• Remove the cause of the excessive temperature rise.
• If the monitor enters standby mode due to a rise in temperature, to return to normal
• If the monitor enters standby mode due to a rise in temperature, to return to normal
display, turn the power switch off and then back on again. The monitor, however, will enter
standby mode again if the cause of the temperature rise is not eliminated. Check whether
the monitor is placed at a location where a quick rise in temperature is likely. Internal
temperature rises quickly if the vents on the monitor are blocked. Internal temperature
rises quickly if dust accumulates inside the monitor or around the vents. Remove dust if
possible.
standby mode again if the cause of the temperature rise is not eliminated. Check whether
the monitor is placed at a location where a quick rise in temperature is likely. Internal
temperature rises quickly if the vents on the monitor are blocked. Internal temperature
rises quickly if dust accumulates inside the monitor or around the vents. Remove dust if
possible.
The internal clock is not working.
• The clock is maintained by the internal battery. The battery may be exhausted. Contact
InFocus Technical Support for assistance. Note: The estimated service life of the internal
battery is 5 years.
battery is 5 years.
LED Status
Monitor Touch
Panel LED Status
Panel LED Status
Monitor Power
LED Status
LED Status
Computer Mod-
ule Power button
ule Power button
Description
Solid Green
Solid Blue
The monitor and computer module are powered on.
Solid Orange
Flashing Red
The monitor and computer module are in standby mode. Press the
POWER button on the remote or monitor to turn it on.
POWER button on the remote or monitor to turn it on.
Solie Green
Solid Red
The monitor is on, but the computer module is not. Press the com-
puter module Power button.
puter module Power button.
Flashing Green
The monitor is powered on and is waiting for an active source.
Flashing Red
There is a problem with the monitor. Contact Technical Support.
Flashing Orange
The POWER ON DELAY function is active. The image will appear after
a pre-determined number of seconds.
a pre-determined number of seconds.
Flashing Red and
Green
Green
The monitor is overheating. See the Troubleshooting Tip above.
Flashing Red and
Orange
Orange
The monitor is in standby mode and is operating per the SCHEDULE
parameters.
parameters.
Solid Green
Normal Operation
Flashing Orange
Initializing
Flashing Orange
and Green
and Green
Initializing
Off
Off
Off
The monitor and computer module are powered off. No power is
supplied.
supplied.
For additional troubleshooting support, please contact:
InFocus Corporation Technical Support
6am-5pm PST
877-388-8385
www.infocus.com/support
InFocus Corporation Technical Support
6am-5pm PST
877-388-8385
www.infocus.com/support