Ingenico 6500 ユーザーズマニュアル

 

110 

Chapter 11 IBMEFT Download 

 

Section 11.4 Outline of Download Process Steps 

11.4 

The download process is as follows: 

1.  Ensure that all Ingenico 6500 terminals operating in the store are running the same 

levels of software. If they are not, take note of the software levels (see section 

proceeding to see if additional testing is necessary. 

2.  Install all of the necessary Ingenico download utility and EFT files to the proper 

directory on the store controller or server. 

3.  From the store controller, initiate the download. 

4.  Sign onto each cash register that has an Ingenico 6500 terminal attached to it. The 

store controller will check for Ingenico 6500 EFT version levels. If the EFT version 
levels differ from the Ingenico 6500, the store controller will detect that and 
automatically update the software. 

Note:  For stores that operate 24 hours, the process involves going to one unused 

register at a time, until every cash register and every Ingenico 6500 terminal 
is upgraded. Ask store management for cashier assistance to prevent 
interruption of store operations and facilitate awareness of progress. 

While the download is in process at a terminal, it cannot be used to process 
transactions.  

11.4.1 

Depending on your cash register configuration, the i6500 terminal may not be used if 
PROGxxxx/PARMxxxx is displayed during download. If no message is displayed in the 
cashier display, debit and credit transactions cannot be processed. 

It is critical to execute a systematic incremental procedure in order to ensure consistency of 
download on all units in store. For assistance in the preparation to implement a multiple-
unit simultaneous download procedure, please contact your Ingenico Project Manager. 

 

 

Monitor both the store controller and Ingenico 6500 terminal during the download process.