Ingenico 6500 ユーザーズマニュアル

 

12 

Chapter 3 System Configuration Menu 

 

Section 3.3 Changing the Display Contrast 

3.3 

If you are have difficulty reading your terminal screen, you can increase or decrease the 
contrast. This setting is stored in sysPara.cfg. You can also test the display contrast: see 

Display 

Action 

 

To access the extended menu, restart the terminal 

by pressing [1] + [CAN] + [OK]; while the terminal 

is starting up, access the extended menu by 

pressing the [1] and [3] keys simultaneously. 

Serialnum Inject 

System Config 

System Info 
Supervisor Menu 

Press [ ], [Enter] to select System Config. 

System Date/Time 

Display Contrast 

Press [ ], [Enter] to select Display Contrast. 

Contrast = 100% 

+                 – 

The current value is displayed, between 0 and 

100. To decrease the contrast, press the [ ] key. 

To increase the contrast, press the [↑] key. When 

the desired setting is reached, press [Enter] to 

accept and return the configuration menu.  
Note: If you press [Can] or [CORR], the contrast 

setting is not changed.  

Note:  The terminal modifies contrast settings automatically when temperatures vary. 

3.4 

You may disable, enable, or change the beep tones that sound when keys are pressed. These 
settings are stored in sysPara.cfg. To test the beep tones, see 

3.4.1 

Display 

Action 

 

To access the extended menu, restart the terminal 

by pressing [1] + [CAN] + [OK]; while the terminal 

is starting up, access the extended menu by 

pressing the [1] and [3] keys simultaneously. 

Serialnum Inject 

System Config 

System Info 
Supervisor Menu 

Press [ ], [Enter] to select System Config.