Ingenico 6500 ユーザーズマニュアル

 

 

Ingenico 6500 User’s Guide 

61 

 

6.5.3 

The Auto Detect Retry Times indicates how many times the terminal will attempt a 
communications protocol before trying the next one on the list. For example, if it is set to 3, 
when the terminal starts up, it will try 3 times to connect to the HOST in USB mode. If it fails, 
then it will try 3 times to connect to the HOST in RS485 mode. If it fails, then it will try 3 times 
to connect to the host in Tailgate mode. If it fails, then it will decide that COM1 is working in 
RS232 mode. Therefore, the less retry times, the less amount of time it will take to auto-detect 
the communications type. 

Display 

Action 

 

To access the extended menu, restart the terminal 

by pressing [1] + [CAN] + [OK]; while the terminal 

is starting up, access the extended menu by 

pressing the [1] and [3] keys simultaneously. 

Serialnum Inject 
System Config 
System Info 

Supervisor Menu 

Press [ ], [ ], [ ], [Enter] to select Supervisor 

Menu. 

Enter Password: 

Key password [2] [6] [3] [4], then press [Enter]. 

Change Password 
Application File 
Security 

Sys Parameters 

Press [ ], [ ], [ ], [Enter] to select Sys 

Parameters. 

Download Method 
Download Port 
Setup Port 

Auto Detect 

Press [ ], [ ], [ ], [Enter] to select Auto Detect. 

AD On/Off 
AD Timeout 

AD Retry Times 

Press [ ], [ ], [Enter] to select AD Retry Times. 

Old Value: XXXXX 
Enter New Value:  

The current value displays. Enter the number of 

times to retry the auto-detection of the Host port, 

from 0 to 10.