Ingenico 6500 ユーザーズマニュアル

 

 

Ingenico 6500 User’s Guide 

87 

 

8.3 

The point of sale (POS) system, which can be comprised of the server, store controller, and 
host devices, communicates with the Ingenico 6500 terminal through an RS-232 or RS-485 
serial interface, Ethernet LAN, or USB, depending on the requirements of the host device 
(typically a computer or ECR). Data is sent using one of these interfaces over a cable that 
connects the host device to the Ingenico 6500 terminal. 

The Ingenico 6500 terminal can connect directly to a cash register, computer, Ethernet 
LAN, or RS485 LAN. Peripherals such as check readers and printers can be connected to 
the AUX port.  

Depending on your configuration, there are two to four communication ports. 

The HOST port, which connects to POS terminals, can connect to the following protocols: 
RS232, USB/PoweredUSB, RS485 IVI LAN protocol, or RS485 Tailgate protocol (North 
America only). 

The AUX port is RS232 for connecting an auxiliary device such as a printer or check 
reader. 

The E-NET port (Ethernet 10 base T, TCP/IP) is available on certain configurations. 

The ITI port is for ISDN and is available in Germany. 

Note:  For instructions on making these connections, refer to the Ingenico 6500 

Installation Guide. 

 

8.4 

 

Millenium ASIC Processor

User Application

Digitizer

Processor

Stylus

Ingenico 6500

Cash Register

Store Controller

LCD

MSR

SCR

System & Security

Application

Maintenance

Application

Operating System