IBM PowerLook 2100XL ユーザーズマニュアル

 

This section serves as a quick reference to the connection and installation procedures for the 
PowerLook 2100XL scanner. 

 

 

Unpack your scanner.  Make sure that all the scanner system hardware, software, cabling, and 
documentation items indicated on the packing list are present. 

 

a) 

For PC users, turn off your computer and remove the computer’s housing cover.

 

b)  For New Power Mac G3 and G4 users, turn off your computer and open the side lid of your 

computer.

c) 

Locate an available slot.

d)  Insert the SCSI card by pressing it gently but firmly into the slot.  Make sure it is firmly 

seated in the slot and firmly tighten the screw (as shown in the figures below).

For 

PC 

Users 

    For 

New Power Mac G3, G4 users

 

 
 

 

 

 

 
 
 
 

 

Connect the SCSI cable to the SCSI interface card and the other end of the SCSI cable to the 
scanner.  For stable SCSI connection, setting terminator is required.  Please refer to Appendix A 
for more details on setting termination. 

 

Connect the power cord to the scanner and plug the other end of the power cord into an available 
outlet (socket). 

 

 

3