IBM 3590 ユーザーズマニュアル
Intervention Messages
The intervention screen displays intervention messages on the operator panel.
The intervention screen consists of an 8-character intervention message that is
displayed in a large font and a prompt. The prompt indicates that pressing
Enter allows access to the Options menu. The screen also has device status
information and a 2-line message area in the standard font. A drive type is
displayed (see Table 2 on page 9).
The intervention screen consists of an 8-character intervention message that is
displayed in a large font and a prompt. The prompt indicates that pressing
Enter allows access to the Options menu. The screen also has device status
information and a 2-line message area in the standard font. A drive type is
displayed (see Table 2 on page 9).
Figure 6 shows the intervention screen with an example of a Mount
command. The Mount command prompts the operator to mount a tape with
the volume serial (volser) 123567. In this example, M means mount and S
means scratch.
command. The Mount command prompts the operator to mount a tape with
the volume serial (volser) 123567. In this example, M means mount and S
means scratch.
Table 4 describes messages that can be displayed for the 3590.
Table 4. Intervention and Device Activity Messages
Message
Message Meaning
FID 1 Messages
FID 1
These messages indicate device errors that require operator and service
representative, or service representative only action. The device cannot
perform any tasks. See “Appendix B. FID Messages” on page 101.
representative, or service representative only action. The device cannot
perform any tasks. See “Appendix B. FID Messages” on page 101.
ATTN Messages
Figure 6. Intervention and Device Activity Messages
16
3590 Operator Guide