IBM 4685-K03 ユーザーズマニュアル

This section explains how the Keyboard is installed on the IBM 4800 POS terminal. 

_________________________________________________________________________________________ 

This section explains how Keyboard is installed on the IBM 4800 POS terminal (also referred to 

as the system device).   

1.  Connect the keyboard cable 5 to the keyboard. 

a.  Turning the keyboard over and looking from the front side, connect the keyboard 

cable 5 to the right side socket of the two connections. 

 

b.  If also installing the video display, it should be installed before going on to Step 2. After 

the display is connected, continue with Step 2, “With the video display”. (See the 

instruction manual that comes with the IBM 4800 POS terminal for more information 

about how to install the video display.) 

 

2.  Plug the other connector on the keyboard cable into the system device as shown in the 

following figure, routing it through the back side of the system device. 

Chapter 2 Installing the keyboard      5