Husky TREF1736D ユーザーズマニュアル

1.   To change the door swing, remove (4) screws located on 

 

the inside face of the cabinet (See Fig. 1). Flip the door

 

180 degrees. Line up hinge holes with the pre-drilled holes

 

on the opposite side cabinet face. Secure with hinge screws.

RIGHT AND LEFT DOOR SWING

Figure 3

3

Figure 3

1.   Place machine screws through predrilled hole in door or drawer.

 

Line up knob or handle with machine screw and tighten with

 

screw driver.

2.   Repeat process for all additional doors and/or drawers.

KNOB / HANDLE INSTALLATION

Figure 1

1

Figure 1

Figure 2

2

1.   Place shelf clips into predrilled holes located inside the cabinet

 

on the right and left side walls. Once shelf clips are installed

 

rest wood shelf onto clips.

SHELF INSTALLATION

Figure 2

2