Huawei ME99 Series Mini PCIe Module ME909 ユーザーズマニュアル
HUAWEI ME909 Series Mini PCIe Module
Hardware Guide
Hardware Guide
Description of the Application Interfaces
Issue 0.1 (2013-06-09)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
16
3.5 WAKE# Signal
WAKE# pin (the signal that the module uses to wake up the PC) supports software
control.
control.
This signal is used for module to wake up the host. It is designed as an OC gate, so it
should be pulled up by the host and it is active-low.
should be pulled up by the host and it is active-low.
When the module wakes up the host, the BB Chip hold 1s high-level-voltage pulse
and then module output low-level-voltage to wake the host.
and then module output low-level-voltage to wake the host.
Figure 3-4 Connections of the WAKE# pin
3.6 RESIN_N Signal
The RESIN_N pin is used to reset the module's system. When the module software
stops responding, the RESIN_N pin can be pulled down to reset the module
hardware.
stops responding, the RESIN_N pin can be pulled down to reset the module
hardware.
The RESIN_N signal is internally pulled up to 1.8 V, which is automatically on when
3.3 V is applied and it is active-low.
3.3 V is applied and it is active-low.