HP XC System Software 3.2.1 ユーザーズマニュアル
4 Preparing Individual Nodes
This chapter describes how to prepare individual nodes in the HP XC hardware configuration.
The following topics are addressed:
The following topics are addressed:
•
•
•
•
•
•
•
•
•
•
4.1 Firmware Requirements and Dependencies
Before installing the HP XC System Software, verify that all hardware components are installed
with the minimum firmware versions listed in the master firmware list. You can find this list
from the following Web page:
with the minimum firmware versions listed in the master firmware list. You can find this list
from the following Web page:
Look in the associated hardware documentation for instructions about how to verify or upgrade
the firmware for each component.
the firmware for each component.
lists the firmware dependencies of individual hardware components in an HP XC
system.
Table 4-1 Firmware Dependencies
Firmware Dependency
Hardware Component
CP3000
Lights-out 100i management (LO-100i), system BIOS
HP ProLiant DL140 G2
LO-100i, system BIOS
HP ProLiant DL140 G3
LO-100i, system BIOS
HP ProLiant DL160 G5
Integrated lights out (iLO), system BIOS
HP ProLiant DL360 G4
iLO, system BIOS
HP ProLiant DL360 G4p
iLO2, system BIOS
HP ProLiant DL360 G5
iLO, system BIOS
HP ProLiant DL380 G4
iLO2, system BIOS
HP ProLiant DL380 G5
iLO2, system BIOS
HP ProLiant DL580 G4
iLO2, system BIOS
HP ProLiant DL580 G5
CP3000BL
iLO2, system BIOS, Onboard Administrator (OA)
HP ProLiant BL2x220c G5
iLO2, system BIOS, Onboard Administrator (OA)
HP ProLiant BL260c G5
iLO2, system BIOS, Onboard Administrator (OA)
HP ProLiant BL460c
iLO2, system BIOS, OA
HP ProLiant BL480c
4.1 Firmware Requirements and Dependencies
59