HP Whereis Navigator 2.5 ユーザーズマニュアル

 

Whereis® Navigator Installation Guide for HP iPaq with In-Built GPS - version 2.5 

10

This is a step-by-step process for the installation of Whereis® Navigator directly on 
your phone instead of using Activesync®. 

 
 

Step 1 

Check your GPRS data communications settings are correct 
and test it is working (consult your telecommunications 
company for support to enable GPRS if you are unsure). 

Step 2 

Copy the CAB

 file to your phone’s memory (suggest either 

to the memory card or My Documents folder). 
 

Step 3 

Using File Explorer on your phone, browse to the location of 
the CAB file. 
 

Step 4 

Click on the CAB file and installation will commence and 
complete. 
 

Step 5 

Run HP GPS Quick GPS Connection Utility (Ensure that your 
HP iPaq is set for the correct time zone and time setting to 
facilitate the correct data download of GPS information – this 
may take up to 30 seconds to download the necessary 
information). 
 

Step 6 

Start Whereis® Navigator and configure your unique license 
key (under configuration – far right tab). 
 

Step 7 

Verify GPS is active (

 or 

 satellite icon) and 

has a fix (may take up to 1 minute and you should be 
outdoors with a clear view of the sky). 
 

Step 8 

Commence using Whereis® Navigator. 
 

 

                                          

2

 A CAB file is a self-installing application designed to be installed directly on the HP iPaq.  It 

does not run on the Windows operating system, only on the PocketPC operating system.