Hitachi 20VR2W ユーザーズマニュアル

Helpful Notes On Operations 

 

37

 With cable connections, numbers selected to receive specific channels 

may differ from those for antenna connections. Refer to your cable service 
information. 

 In the clock adjustment mode, be sure to enter the first digit within 60 

seconds, or the TV/VCR Combination will automatically leave this mode. 

 Be sure to enter "0" before single-digit numbers. 
 Enter the first digit to set the month within 60 seconds of the 

appearance of the clock set guide. Otherwise, the program you were 
watching will return to the screen. If this happens, press the Prog button 
and start again. 

 The letters for day of the week will automatically appear when you have 

entered both digits for the year. 

 If the day digit entered does not match the calendar, it will advance to 

the first day of the next month (for example, "FEB 29 94" will advance to 
"MAR 01 94"). 

 If you press the Prog button while the clock set guide appears, the TV 

screen will return to the program you were watching. 

 During search playback, horizontal noise bars will appear on the TV 

screen. 

 After the TV/VCR Combination is in the still or slow mode for 3 minutes 

it will stop automatically to protect the tape and video head. 

 In search, still or slow motion playback, some amount of noise may 

appear for tapes recorded in SLP mode. The picture may be completely 
snowy in search, still or slow motion mode for tapes recorded in SP and 
LP speed. 

 While it is possible to change the tape speed when you are recording, 

there will be some distortion on the tape where the change occurred. 

 After the TV/VCR Combination has been in pause for 5 minutes it will 

stop automatically to protect the tape and video head. 

 During a one touch recording, press the OTR button once to see display 

showing the remaining recording time. 

 The cassette will eject automatically if its record tab is missing when you 

press the OTR button or Standby button. 

 If the preset time for a timer recording comes up during a one touch 

recording, the one touch recording will take priority. 

 Timer recording may not be performed or continue if a power 

interruption of more than about 1 minute occurs before or during timer 
recording, even if power resumes thereafter. 

 If the start times of 2 preset programs overlap, the preset time of the 

lower numbered program will have priority.