Hitachi 20VR2W ユーザーズマニュアル

Getting Started 

 

7

A) Without a Converter / Descrambler Box 
Use this connection if your cable system connects directly to your TV/VCR 
Combination without a converter box. 

 

With this connection, you can: 
1) use your TV/VCR Combination remote control to select channels. 
2) program one or more unscrambled channels for timer recording. 

 You can use the TV/VCR Combination Channel Up/ Down keys to select 

the desired channel. 

 You cannot record or view scrambled channels with this connection. 

Note to CATV System Installer 
This reminder is provided to call the CATV (Cable TV) System Installers 
attention to Article 820-40 of the NEC that provides guidelines for proper 
grounding and, in particular, specifies that the cable ground shall be 
connected to the grounding system of the building, as close to the point of 
cable entry as practical. 

B) With a Converter/ Descrambler Box 
If your cable service supplies you with a converter box, you can use the 
basic connection shown here. 

 

With this connection, you can record and view any channel including 
scrambled channels. However, channel selection must be made at the 
cable company converter box. This means that channels cannot be 
changed using the TV/VCR Combination remote control. Timer recording 
is limited to one channel at a time, and you cannot view another channel 
other than the one you are recording. 

To Record and View a Scrambled / Unscrambled Channel 
1. Set the TV/VCR Combination channel selector to the output channel of 
the cable converter box (e.g. CH3). 
2. Select the channel to be recorded at the cable converter box. 

Note: Refer to page 11 for instructions on setting tuner to the cable TV mode.