Hitachi DZ-GX5000A ユーザーズマニュアル

ページ / 158
English
129
Trouble Messages
A message may appear while you are operating the DVD video camera/recorder. If a message 
appears, refer to the following table and take appropriate corrective action.
Messages are arranged in alphabetical order.
Message
Cause & Troubleshooting
Reference 
page
(1) Data error in a part 
of image file. Repair 
data now?
(2) Found error in image 
file. Repair data now?
(3) Data error in all 
image file. Repair all 
data now?
It is possible that the system cannot normally complete writing of 
file when power is turned off for some reason during recording or 
editing (deleting, dividing or combining scenes, or creating play 
list). Selecting “YES” will automatically repair the video file, but 
even if “NO” is selected, the same message will appear when the 
DVD video camera/recorder is turned on next time. (Do not 
remove the disc while the DVD video camera/recorder is 
recognizing it: Ignoring this will deactivate the file repair function.)
Follow the instructions on screen, taking note of the following 
cautions:
• Repair will normally be complete in several minutes, but it may 
take longer (up to one hour).
• Be sure to use the AC adapter/charger to power the DVD video 
camera/recorder when repairing data: Repair is not possible 
using a battery. If a battery has been attached, turn the power 
switch off once, connect the AC adapter/charger, and then start 
repairing.
• Data may not be repaired, depending on the timing when 
power was turned off.
• Data may not be repaired normally if data recorded on another 
recorder is mixed in.
• The repaired data may be different from the original recorded 
content because of partial deletion of defective portion.
• Since the date/time for repair is added to the repaired data 
(only the corrected portion for partial repair), the original date/
time information will be lost.
• Since all movies, and then all stills, are repaired, the order of 
recorded contents will be lost in case of message (2) (3) only.
• See *1 on page 134.
(1) Disc is not 
formatted. Format the 
disc now?
(2) Disc Format. Select 
record format. 
(Displayed only when 
DVD-RW is used.)
A DVD-RW/+RW that was initialized by PC and not initialized for 
camera use is inserted. 
37
Auto finalizing...
Plaese wait...
This message will appear with a +RW when it is removed after 
recording, or the last recorded scene was deleted. The auto-
finalized +RW can be played back on a DVD recorder/player.
106
Cannot combine scene. Unless consecutive scenes are selected, they cannot be 
combined.
79
Cannot combine scene 
of multiple programs. 
Create PlayList first, 
and then combine 
scenes.
Scenes in different programs (different recording dates) cannot 
be combined. Create a Playlist first, and then combine such 
scenes on the playlist.
79