Gefen Marine Battery EXT-IP-2-RS2322 ユーザーズマニュアル

page | 8

RS-232 and IP Configuration

A

dv

anc

ed Oper

ation

A

dv

anc

ed Oper

ation

When using the IP to 2 x RS-232 Converter for the first time, it is recommended that the 

unit be configured using the Gefen Discovery Tool. The Gefen Discovery Tool is free 

software that is available from the Support > Downloads section of the Gefen Web site.

1.  Download the Gefen Discovery Tool from the Gefen Web site. Extract the files from 

the .zip file and follow the installation and configuration instructions in the included 

User Manual.

2.  Connect the IP to 2 x RS-232 Converter to the network.
3.  Use the Gefen Discovery Tool to identify the unit on the network.
4.  Refer to the Gefen Discovery Tool User Manual for important information on setting 

the IP address, subnet mask, gateway, HTTP listening port, and Telnet listening port. 

 

The following table lists the diefault IP settings for the IP to 2 x RS-232 Converter. 

 

Description

IP Address / Port

Description

IP Address / Port

IP Address

192.168.1.72

UDP Port

23

Subnet

255.255.255.0 Local UDP Port

50007

Gateway

192.168.1.254 Remote UDP IP

192.168.1.255

HTTP Port

80

Remote UDP Port 50008

 

5.  After the IP settings have been set, make sure to click the Save button in the Gefen 

Discovery Tool to save the changes. After saving the changes, click the Reboot button 

to reboot the unit.

6.  Launch a Web browser and enter the IP address, that was assigned to the 

IP to 2 x RS-232 Converter, in the address bar to access the Web interface.