Gaggenau RB 472 ユーザーズマニュアル

24

1. Measure distance A between the adjusting ribs and 

the bottom edge of the refrigerator compartment 

door.

2. Loosen the two nuts (a) and remove the adjusting 

rib (b).

3. Mark this value A on the rear side of the furniture 

door.

4. Determine the middle of the door and label it.
5. Rest the adjusting rib on the furniture door and align 

to the markings. Mark the drill holes.

6. Pre-drill the holes.
7. Tightly screw the adjusting rib.

Notes:
–

Attach the adjusting rib with at least 10 screws on 

the furniture door. One screw should be screwed in 

under the threaded rod in each case.

–

The adjusting rib has a various holes for different 

furniture door design variations. Always carry out 

screwing jobs on the most stable part of the furniture 

door.

Note:
The fixing ribs are pre-assembled for stainless steel 

doors. In this case continue with the next installation step 

(“C / 11. Mounting the furniture door 

(freezer compartment)”).
1. Hang the furniture door on the threaded rod (a).
2. Adjust the furniture door using the threaded rod 

(Torx screwdriver).

Re-examine the dimensions of the crack 

continuously. To do this, use the assembly 

gauge (b).

3. Transfer the position of the fastening screws on the 

outer edge of the appliance door to the furniture 

door and mark.

4. Remove furniture door.