Ericsson ATSC Broadcast Receiver RX8320 ユーザーズマニュアル

 Web Browser Control
 

5 

Web Browser Control 

5.1 

Introduction 

A personal computer (PC) running a Web Browser can be used to configure, control 
and monitor the receiver remotely. The following web browsers have been tested: 

•  Microsoft Internet Explorer (This is the only browser supported by Ericsson) 

•  Mozilla Firefox (Functional but unsupported) 

•  Google Chrome (Functional but unsupported) 

1.  Connect the PC to either of the two IP control interfaces on the rear of the 

receiver (labelled ETHERNET 1 / 2 or CONTROL 1 / 2).  

2.  Enter the settings for the relevant control port (IP Address, Subnet and 

Gateway) via the front panel Network menu. 

Note:  If the receiver is connected to an existing network, or is not on the same 

subnet as the control PC, assistance from the network administrator may be 
required in modifying the network settings. 

3.  Open a Web Browser window on the PC. 

4.  Enter the IP address of the receiver into the address field of the Web Browser. 

The Status page of the receiver interface will appear in the Web Browser 
window. 

Note:   To assist with troubleshooting, the IP control ports will respond to ICMP 

PING request messages. 

More details on all receiver user settings available on Web Browser Control can be 
found in the Reference Guide. 

5.2 

Using the Web Browser Interface 

The Web Browser Interface displays various web pages, corresponding to the 
different functions of the receiver, in the format shown in Figure 4. 

EN/LZT 790 0008/2 R1A

 2011-03-30 

 

 

 

19 (36)