Elmo Computer Hardware BUT- X/YYY ユーザーズマニュアル
Pin
#
Short
Form
Function
Description
14 ECLP External
current limit
peak
External voltage scales down the rated value.
Voltage range: 0 V to 3.75 V (3.75 V = rated Ip)
Refer to Section 4.2.
Voltage range: 0 V to 3.75 V (3.75 V = rated Ip)
Refer to Section 4.2.
15 LMRET Latch Mode
return
Return for Latch Mode signals.
16 GAIN Current gain
change
Shorting this pin to LMRET pin (J1/15) reduces
the proportional gain of the current loop by 70%.
the proportional gain of the current loop by 70%.
17 HARET Hall supply
voltage return
Return used only for Hall supply.
18 HALL+
5V
+5 V Hall
supply voltage
+5 V supply voltage for Hall sensors.
Output current: maximum of 13 mA.
Output current: maximum of 13 mA.
19 SORET Status output
return
Status output common AOK, SO1, SO2, SO3.
Isolated from circuit common. See Figure
Isolated from circuit common. See Figure
20
SO2
Status output 2
Status indication output 2.
Same specification as in pin J1/2.
Same specification as in pin J1/2.
21
SO3
Status output 3
Status indication output 3.
Same specification as in pin J1/2.
Same specification as in pin J1/2.
22
EN-
Enable -
Negative voltage input of “Amplifier Enable” function.
Optocoupler is isolated from the amplifier.
For details, see pin J1/1.
Optocoupler is isolated from the amplifier.
For details, see pin J1/1.
Dragonfly/ Butterfly Installation Guide
Installation
MAN-DRBUIG (Ver. 1.1)
3-8