Electro-Voice System Controller NetMax N8000 ユーザーズマニュアル

NetMax N8000 System Controller
Owner’s manual / Bedienungsanleitung

SIGNAL PROCESSING

Sample Rate

48 kHz internal
32 kHz - 192 kHz external

Data Format

24 Bit linear A/D and D/A conversion, 48 Bit processing

Signal Processing

2 DSPs Standard (150 MHz, 300 MIPS)
1 DSP per Audio Module (100 MHz, 100 MIPS)
DSP-1 Extension Module optional (+300 MIPS)

INTERFACES

Ethernet

10 / 100 MBit/s, RJ-45 (PC Control)

CAN

10... 500 kbit/s, 2 x RJ-45 (Remote Amp Control)

RS-232

2 Ports, 9pin D-Sub female (Remote Control)

USB

USB Type B on Front Panel (PC Control)

GPIO Control Port

2 x 6-pole Euro block
4 Control Inputs (analog 0 - 10 V / logic control)
3 Control Outputs (Relay contact to ground)
1 Fault Output (NC Relay contact)
3 Reference Outputs (+5 V / +10 V / GND)

N8000 GENERAL SPECIFICATIONS

Power Supply

100 - 240 V AC, 50/60 Hz

Power Consumption

90 W max. (incl. 2 x AI-1, 2 x AO-1, 1 x CM-1 modules)

Safety Class

I

Cooling

Left-to-right, 3-stage fan

Operating Temperature Range

0 °C ... 40 °C

Dimensions (W x H x D)

483 x 88.1 x 381 mm (19“, 2 HU)

Weight

N8000 (without optional modules): 7.35 kg
AI-1 Analog Input Module: 200 g
AO-1 Analog Output Module: 260 g
CM-1 CobraNet™ Module: 75 g

MODULES / OPTIONS

AI-1 Analog Input Module

8 analog audio inputs, line level, electronically balanced

AO-1 Analog Output Module

8 analog audio outputs, line level, electronically balanced

CM-1 CobraNet™ Module

32 digital audio inputs and outputs, 2 CobraNet™ ports
(Primary / Secondary) for network redundancy

DSP-1 DSP Extension Module

Internal DSP processing power and Delay-RAM extension,
300 MIPS, 256k x 24 SRAM

MI-1 Microphone Input Module

8 microphone inputs, programmable Gain and Phantom
Power, PAD for line level switching

DI-1 Digital Input Module

8  digital  audio inputs, AES/EBU, S/PDIF and Optical for-
mats, sample rate converters for 32-192 kHz operation