EE Brightbox ユーザーズマニュアル
EE Bright Box User Manual
133
Description of Port Trigger settings
The table below contains a description of the settings on the Port Triggers page :
Section
Description
Number
This field is the index for the port trigger entry. You
can configure up to 10 port triggering rules on the
router.
can configure up to 10 port triggering rules on the
router.
Trigger Port
This field is used to configure the trigger port that
an application uses to open the incoming public
ports.
Please refer to the instructions supplied with your
software to determine which trigger port you should
be using.
an application uses to open the incoming public
ports.
Please refer to the instructions supplied with your
software to determine which trigger port you should
be using.
Trigger Type
This dropdown is used to configure the traffic type
on the trigger port.
Select ‘TCP’ for Transmission Control Protocol traffic
triggering
Select ‘UDP’ for User Datagram Protocol traffic
triggering.
Please refer to the instructions supplied with your
software to determine which trigger traffic type you
should be using.
on the trigger port.
Select ‘TCP’ for Transmission Control Protocol traffic
triggering
Select ‘UDP’ for User Datagram Protocol traffic
triggering.
Please refer to the instructions supplied with your
software to determine which trigger traffic type you
should be using.
Public Port
This field is used to configure the public incoming
ports that are opened when the trigger port is
activated by your software.
You can enter a single public port, multiple ports
ports that are opened when the trigger port is
activated by your software.
You can enter a single public port, multiple ports