Edirol R-09HR ユーザーズマニュアル

 

R-09HR configuration settings

 

Selects the reverb type.

 

fig.plaersetting-e.eps_80

 

Use the [PLAY Button 

] and [STOP Button 

] to select 

“Player Setup,” then press the [REC Button].

 

fig.plaersetting-e.eps_80

 

Use the [PLAY Button 

] and [STOP Button 

] to move 

the cursor to the Rev Type line.

 

fig.plaersetting-e.eps_80

 

Use the [PREV button 

] and [NEXT button 

] to change 

the Rev Type value.

 

• When finished with the settings, press the [MENU button] to return to the previous screens, in order.
• The reverb type can also be switched in the main screen. Press the [REVERB Button] for a number of 

seconds in the main screen to display the reverb on/off screen. While this screen is displayed, 
change the reverb type by pressing the [PREV button

 

 

 

] or [NEXT button

 

 

 

].

• Reverb cannot be be applied when playing a song with a sampling frequency of 88.2 kHz or 96 kHz.

 

This reverb effect simulates the reverberation in a 
concert hall. A mild reverberation with a long, 
spreading sound is obtained. Hall 2 has shorter 
reverberation than Hall 1.

HALL2

ROOM

This reverb effect simulates the reverberation in a 
room. A short, bright reverberation that simulates a 
live stage is obtained.

PLATE

This reverb effect simulates plate reverberation (a 
reverberation unit using vibrations from metal 
plates). 
A metallic-sounding reverberation with an extended 
high range is obtained.

Move the 

cursor 

up or down

Enter

Move the 

cursor 

up or down

Change 

the value

R-09HR_e.book 92 ページ ２００７年１２月１７日　月曜日　午後２時１６分