Edirol R-09 ユーザーズマニュアル

 

Recording

 

fig.rec-start-e.eps_80

 

Press the [REC Button] in recording-standby mode (while 
the [REC Indicator] is blinking).
The [REC Indicator] lights up, and recording begins.

 

• Recording can also be started by pressing the [PLAY/PAUSE 

Button].

• If you slide the HOLD switch to the ON position after starting a 

recording, the recording will not stop nor will the recording 
level change even if a button is accidentally pressed.

• If a microphone or other device is connected to the [LINE IN 

Jack] or [MIC Input Jack], the [Internal Mic] cannot be used. 
When using the [Internal MIC], do not connect anything to the 
[MIC Jack] or [LINE IN Jack].

• If the [Input Level Button] is used in recording-standby mode or 

during recording, the input level will change. Be careful to not 
mistakenly use the [Input Level Button].

• Power cannot be turned off during recording.

First stop the recording, then turn off the power.

 

fig.rec-stop-e.eps_80

 

The [REC Indicator] goes out.

 

Press the [PLAY/PAUSE Button] to pause.
Press the [PLAY/PAUSE Button] again to cancel the pause and 
restart recording.

 

fig.song.eps_80

 

The display shows the recorded song.

 

The song name is automatically created, e.g., R09_0001.WAV.
The four-digit number forming the latter part of the name is arrived 
at by adding one to highest-numbered existing song.

 

fig.play-start-e.eps_80

 

Press the [PLAY/PAUSE Button

] to listen to the just-

recorded song.

 

Starts 

recording

Stops 

recording

Play

R-09_e.book 32 ページ ２００６年４月６日　木曜日　午後４時５１分