Edirol R-09 ユーザーズマニュアル

ページ / 104
 
92
 
Troubleshooting
 
The settings disappear
 
• If all the settings in the <Menu Screen> are restored to factory defaults, the R-09 may have 
been accidentally reset to factory defaults. Please reconfigure the settings.
 
 
The R-09 is connected to the PC with a USB cable, but the PC doesn’t 
recognize it
 
• The PC will not recognize the R-09 if the connection is made while the <Menu Screen> is 
showing or during playback or recording. First, disconnect the USB cable connecting the R-
09 to the PC, and then try again.
 
 
Displaying the song name is slow when selecting a song
 
• This problem may be caused by a corrupted song, illegal song format, unsupported MP3 
format, a song that is too large, or a song with an .MP3 or .WAV extension that is taking 
time to verify on the R-09 as playable.
These conditions cause the display to be sluggish when selecting a song.
 
 
Feedback occurs when monitoring with headphones
 
• If open air headphones are used to monitor recording, feedback may occur if the 
headphones are too close to the R-09. The R-09’s internal microphones are capable of 
picking up even the faintest of sounds, so do not move too close to the R-09.
 
The internal clock resets
 
• The internal clock takes power from the AC adaptor or batteries to operate when power is 
turned on. When the power is off, the internal clock will run temporarily on the power stored 
in the unit, but if the power is off for several days, the internal clock settings return to the 
original settings (initial status). When power is turned on in initial status, the message “Clock 
Initialized” is shown.
 
R-09_e.book 92 ページ 2006年4月6日 木曜日 午後4時51分