Cybex International Treadmill 710T ユーザーズマニュアル

grounded, dedicated circuit, and one of the following: 115 VAC, 60 Hz and 20 amps, or 230
VAC, 60 Hz, and 15 amps, or 220/240 VAC, 50 Hz and 15 amps. Make sure that the treadmill
is connected to an outlet having the same configuration as the plug. Do not use a ground
plug adapter to adapt the power cord to a non-grounded outlet.

(Save These Instructions)

• Obtain a medical exam before beginning any exercise program. 

• Keep children away from the treadmill. Teenagers and disabled persons must be

supervised while using.

• Stop exercising if you feel faint, dizzy, or experience pain at any time while exercising and

consult your physician.

• Use the treadmill handrails for support and to maintain balance.

• Use caution when mounting and dismounting the treadmill.

• Disconnect all power before servicing the treadmill.

• Use a dedicated line when operating the treadmill.

• Connect the treadmill to a properly grounded outlet only.

• Do not operate electrically powered treadmills in damp or wet locations.

• Keep the running belt clean and dry at all times.

• Stop and place the treadmill at 0 degrees incline (level) after each use.

• Do not leave the treadmill unattended when plugged in and running. After turning off the

treadmill, don't leave it until it comes to a complete stop and is level. To disconnect, turn
all controls to the STOP or OFF position, and then remove the plug from the outlet.

• Inspect the treadmill for worn or loose components before each use. Do not use until worn

or damaged parts are replaced.

• Maintain and replace worn parts regularly. Refer to “Preventive Maintenance” Section of

Owner's Manual.