Cyclades AlterPath family of KVM products ユーザーズマニュアル
Advanced Installation Procedures
117
Connecting AlterPath PMs to the KVM/net
Connecting AlterPath PMs to the KVM/net
You can control an AlterPath Power Management (PM), intelligent power
distribution unit (IPDU), by connecting it to the AUX port on the KVM/net.
By daisy-chaining any combination of PM models, you can control up to 128
outlets from one KVM/net.
distribution unit (IPDU), by connecting it to the AUX port on the KVM/net.
By daisy-chaining any combination of PM models, you can control up to 128
outlets from one KVM/net.
T
To Connect an AlterPath PM to the AUX Port
1. Use an RJ-45 CAT5 cable to connect the AUX port on the KVM/net to the
In port of your AlterPath PM.
2. Configure the AUX port for power management. See “To Configure the
After the PM is connected, you may want to perform one or more of the
following tasks:
following tasks:
Task
Where Documented
Install multiple PM units.
Manage the power of devices connected to
configured PM units.
configured PM units.
• Web Manager – “IPDU Power
• OSD – “Power Management Menu” on
Control the power of a device while
connected to it through a KVM port.
connected to it through a KVM port.
• OSD – “To Power On, Power Off, Lock,