CyberResearch GDO 18 ユーザーズマニュアル
User’s Manual
10
Figure 1-7: Connecting the Optional Touchscreen Cable
2.
Connect the D-sub 9-pin RS-232 connector end of the PS/2 to RS-232 cable
provided with the optional touchscreen package to the 9-pin RS-232 serial
port at the back of your PC. Please refer to Figure 1-7.
provided with the optional touchscreen package to the 9-pin RS-232 serial
port at the back of your PC. Please refer to Figure 1-7.
3.
Install the Touchscreen drivers to your PC.
4.
Following the Touchscreen driver guide to align your touchscreen
positioning.
positioning.
Power Management System
The LCD monitor complies with the VESA DPMS (version 1.0p) power management
proposal. The VESA DPMS proposal provides four phases of power saving modes by
detecting the horizontal or vertical sync signal. When the LCD monitor is in power
saving mode or detects an incorrect timing, the monitor screen will go blank, and the
power LED indicator will start to blink.
proposal. The VESA DPMS proposal provides four phases of power saving modes by
detecting the horizontal or vertical sync signal. When the LCD monitor is in power
saving mode or detects an incorrect timing, the monitor screen will go blank, and the
power LED indicator will start to blink.