CTC Store IPDSLAM-A8/A16 ユーザーズマニュアル
ADSL IP DSLAM
95
4.9 Performance Monitor
Displaying the Physical Layer Information
Describes how to display physical layer information of a port, or all port on CO
side, remote side or both sides.
Command: show adslphysical <all | port no.> [c | r]
Argument List:
Parameter Description
all | port no.
all | port no.
Show all information | show specific port
(c/r) CO/Remote
Example: Display the physical layer information of port 8 on CO side.
IPDSLAM # show adslphysical 8 c
ATU-C:
1.InvSerialNumber: N12345678
2.InvVendorNumber: C1008
3.InvVersionNumber: 1
4. Current SNR margin: 10.5
5. Current attenuation: 0
6. Current status: NO DEFECT
7. Current output power: 8
8. Current attainable rate: 9677
ATU-C:
1.InvSerialNumber: N12345678
2.InvVendorNumber: C1008
3.InvVersionNumber: 1
4. Current SNR margin: 10.5
5. Current attenuation: 0
6. Current status: NO DEFECT
7. Current output power: 8
8. Current attainable rate: 9677
Table 4-21 “show adslphysical” Field Definition
Field Definition
InvSerialNumber
InvSerialNumber
The serial number of the product.
InvVendorID
The ID of vendor
InvVersionNumber
The software version.
Current SNR margin
Noise margin value. (dB)
Current attenuation
Difference in the total power transmitted and the
total power received by the ATU. (dB)
total power received by the ATU. (dB)
Current status
Current state of the ATU line.
Current output power Total output power transmitted by the ATU. (dBM)
Current attainable rate The maximum currently attainable data rate by the
Current attainable rate The maximum currently attainable data rate by the
ATU. (Kbps)