Cub Cadet 59A40003727 サービスマニュアル

•  Check the level of hydraulic oil in tractor before

starting each day’s operation. If necessary, add oil 
as recommended in your tractor owner’s manual.

•  Lubricate after every eight hours of operation (See

Figure 30): 

  -  Apply lubrication to the grease fitting in the hub 

at the mast end (rearward end) of each boom 
arm.  

  -  Apply lubrication to the grease fittings at the 

each end of both boom lift cylinders.

  -  Apply lubrication to the grease fitting in the hub 

at the upper end of each bucket cylinder. 

  -  Apply lubrication to the grease fittings in the 

outer end of all four pivot pins of the loader 
bucket.

After every eight hours of operation, check all hard-
ware and tighten where required.
Replace hoses immediately if they are damaged by 
a cut or scrape, extruded at the fittings, or leaking. 
Hydraulic oil leaks should be repaired promptly to 
avoid loss of oil and serious personal injury from 
escaping oil.