Crestron electronic CEN-iServer ユーザーズマニュアル

Crestron CEN-ISERVER 

 

Crestron iServer™ Network Audio Server

•  Enter the IP address, IP mask and default router of the CEN-ISERVER via 

the Crestron Toolbox (Functions | Ethernet Addressing); otherwise enable 
DHCP. 

•  Confirm Ethernet connections between CEN-ISERVER and PC. If 

connecting through a hub or router, use CAT5 straight through cables with 
8-pin RJ-45 connectors. Alternatively, use a CAT5 crossover cable to 
connect the two LAN ports directly without using a hub or router. 

•  Use the Address Book in Crestron Toolbox to create an entry for the  

CEN-ISERVER with the CEN-ISERVER’s TCP/IP communication 
parameters. 

•  Display the “System Info” window (click the 

 icon) and select the 

CEN-ISERVER entry. 

Program or firmware files may be distributed from programmers to installers or from 
Crestron to dealers. Firmware upgrades are available from the Crestron website as 
new features are developed after product releases. One has the option to upload 
programs via the programming software or to upload and upgrade via the Crestron 
Toolbox. For details on uploading and upgrading, refer to the SIMPL Windows help 
file or the Crestron Toolbox help file. 

If a SIMPL Windows program is provided, it can be uploaded to the control system 
using SIMPL Windows or Crestron Toolbox. 

Check the Crestron website to find the latest firmware. (New users may be required 
to register to obtain access to certain areas of the site, including the FTP site.) 

Upgrade CEN-ISERVER firmware via Crestron Toolbox. 

•  Establish communication with the CEN-ISERVER and display the “System 

Info” window. 

•  Select Functions | Firmware… to upgrade the CEN-ISERVER firmware. 

Using Crestron Toolbox, display the “System Info window (click the 

 icon) and 

select the Functions menu to display actions that can be performed on the  
CEN-ISERVER. 

Be sure to use Crestron Toolbox to create the CEN-ISERVER IP table. Omit this 
item for control systems. 

•  Select Functions | IP Table Setup. 
•  Add, modify or delete entries in the IP table. The CEN-ISERVER can have 

only one IP table entry. 

•  A defined IP table can be saved to a file or sent to the device. 

Edit the control system’s IP table to include an entry for the CEN-ISERVER. The 
entry should list the CEN-ISERVER’s IP ID (specified on the CEN-ISERVER’s IP 
table) and the internal gateway IP address 127.0.0.1. 

•  19