Creek Audio STVG-989 ユーザーズマニュアル

Follow directions on page E7 for 
“Making the Connections”.

No sound - If audio is 
connected to TV or 
VCR.

Source Selection on TV or 
VCR is not correct.

No song lyrics appear 
on screen.

Connect the video cable to the 
Singing Machine’s VIDEO OUT 
and to the TV VIDEO IN.

Using your TV remote to select 
VIDEO input.

Connect from VIDEO OUT of the 
system to the VIDEO IN of your 
VCR or connect to an RF 
Modulator and then to the TV 
cable input. Refer to “Making the 
Connections” on page E7.
Check the disc to be sure it is a 
CDG. (See page E20 for details.)

Video cable is not connected 
properly to the TV.

Source selector on TV is not 
set to VIDEO.

Check disc to be sure it is clean. 
(See page E15 for cleaning 
instructions.)

A CDG is loaded but the 
CDG indicator is not lit.

TV does not have video line 
input.

17

Image is blurry.

Camera has not warmed up.

Camera lens is dirty.

Wait a minute for the camera to 
warm up.

Clean the camera lens.

Camera lens is out of focus.

Adjust the lens of the camera by 
slightly rotating either left or right 
until the display is clear. Do not 
overturn the lens.

Use your TV remote to select 
VIDEO input. (Refer to page E8 
under Common ways to configure 
your TV or VCR)

Source selector on TV is not 
set to VIDEO.

Ensure white and red patch cords 
are securely inserted into both 
The Singing Machine and the 
TV/VCR.

Patch cords are not 
connected securely.

Use your TV remote to select the 
proper VIDEO input or select the 
proper VIDEO input on the TV 
itself. (Refer to page E8 under 
Common ways to configure your 
TV or VCR)

Source selector on TV is not 
set to VIDEO.