Creative Desktop Wireless 6000 ユーザーズマニュアル

Installing Software

 

You need to install software to use Creative Desktop Wireless 6000. The following instructions are 
applicable to Windows 98, Windows 98 Second Edition (SE), Windows Millennium Edition (Me), 
Windows 2000 and Windows XP.

1.

After you have connected Creative Desktop Wireless 6000, Windows will detect the USB device 
and install the required drivers automatically. 

2.

Insert the Creative Desktop Wireless 6000 Installation CD into the CD-ROM drive. The CD 
supports Windows Autoplay mode and starts running automatically. If the CD does not run 
automatically, click Start -> Run. In the Run dialog box, type d:\ctrun\start.exe (replace d:\ with 
your CD-ROM drive letter)

3.

Select the applications to install, and then click the OK button.

4.

Follow the instructions on the screen to install your Creative Desktop Wireless 6000.

5.

When prompted, restart your computer.

For your USB keyboard to work with MS-DOS-based utilities and non-windows modes, your computer 
must have USB Legacy Support (may vary depending on motherboard manufacturer) enabled in the 
BIOS.

Windows 98 and 98 SE 
users may be prompted by 
an Add New Hardware 
Wizard dialog box when 
Windows detects a USB 
device. Follow the 
instructions on the screen. 
You may need to insert the 
Windows Installation CD 
into the CD-ROM drive 
during installation. Some 
computers may be supplied 
without the Windows CD, 
but have the necessary files 
stored in c:\windows\
options\cabs (replace c:\ 
with the drive letter your 
Windows has been 
installed on).