Cornelius Door Latch ユーザーズマニュアル
Door Latch Assembly Installation Instructions
Publication Number: 729011146INS
- 2 -
© 2004, IMI Cornelius Inc.
I
NSTALLATION
IMPORTANT: Disconnect power from machine before starting this procedure!
1.
Remove the top cover of the machine
.
A. Remove two screws from rear of top.
B. To remove cover open door and pull cover
forward.
FIGURE 2
FIGURE 3
2.
Remove the side panel of the machine
.
A. Remove latch cover plate.
NOTE: When reassembling latch guard use
the #8 PLASTIC screws supplied.
the #8 PLASTIC screws supplied.
B. Remove 2 screws holding splash guard.
FIGURE 4
FIGURE 5
C. Remove one screw from lower rear on right
side panel.
D. Slide panel forward to remove.
NOTE: Do not loose plastic spacers located
on panel clips.
on panel clips.
FIGURE 6
FIGURE 7