Fujitsu CONNECT2AIR AP-600RP-USB ユーザーズマニュアル

CONNECT2AIR™ WLAN AP-600RP-USB

Page 16 / 62

6.1 AP-600RP-USB with ADSL Router

( 1 ) ADSL Router

( 2 ) AP-600RP-USB

( 3 ) Notebook

WAN: PPPoE over ADSL
LAN:

static IP: 192.168.1.1

DHCP on: 192.168.1.10 - 90
GW:

192.168.1.1

DNS:

auto

WAN: no ISP
LAN:

static IP: 192.168.1.254

DHCP disabled
Routing: off (cable from Router

connected to the LAN

interface)
SSID: CONNECT2AIR

TCP/IP: get IP and DNS address
automatically
SSID: CONNECT2AIR
Data Rate:

auto

Connecting the devices to the AP-600RP-USB:

Connect the ADSL Router to one of the LAN port, not to the WAN port. Additional network-
ing devices like network printers, servers or scanners can be plugged to one of the free
LAN ports and will be integrated in the IP segment of 192.168.1.X.

Installation Note

The AccessPoint as well as the ADSL Router have routing capabilities. Therefore it is
suggested to operate the AccessPoint only as a Wireless Bridge. Connecting the ADSL
Router to one of the LAN ports will put the AccessPoint into the bridging mode. The
network management will therefore also be handled by the ADSL Router (DHCP, etc.).

ADSL Router:
- DHCP Server
- managing the PPPoE session

AP-600RP-USB:
- handling the wireless LAN (WLAN) access