Fujitsu CONNECT2AIR AP-600RP-USB ユーザーズマニュアル
CONNECT2AIR™ WLAN AP-600RP-USB
Page 53 / 62
8.6 Toolbox
8.6.1 Administrator Toolbox
Change the system password as quickly as possible since your configuration will other-
wise remain unprotected. If you forget the password, the only remedy is to reset the device
to restore all settings to their factory values and revert the password to 'connect'. All user
settings that were made are lost as a result.
wise remain unprotected. If you forget the password, the only remedy is to reset the device
to restore all settings to their factory values and revert the password to 'connect'. All user
settings that were made are lost as a result.
L
For security reasons, we strongly recommend that you change the system pass-
word directly.
The system settings for the AccessPoint can be saved in a file for input into the device at a
later stage again if necessary. For example, if you accidentally exclude yourself using the
ACL (Access Control List), you can reset the AP and return it quickly to operating status by
re-entering the configuration data.
later stage again if necessary. For example, if you accidentally exclude yourself using the
ACL (Access Control List), you can reset the AP and return it quickly to operating status by
re-entering the configuration data.
8.6.2 Firmware Upgrade
This option provides information about the loaded firmware version.
Update instructions are provided for each firmware upgrade available on the Internet.
Please read the instructions carefully.
The Support Link opens the support pages of Fujitsu Siemens Computers on the Internet.
There you can find FW upgrades as well as additional information on printer compatibility.
Update instructions are provided for each firmware upgrade available on the Internet.
Please read the instructions carefully.
The Support Link opens the support pages of Fujitsu Siemens Computers on the Internet.
There you can find FW upgrades as well as additional information on printer compatibility.